2025 K Show: ALLROUNDER 475 V Vertical Machine Global Debut
ALLROUNDER 475 VIt will debut at the K Show in 2025. The device featuresHigh energy efficiency、Small land area、High cost performanceGlobal sales will begin in January 2026.
This vertical injection molding machine is flexible in application and is ideal for overmolding inserts both manually and automatically.
1.Key points highlighted by the class representative
October 8-15, 2025, K Fair in Germany.
ARBURG Booth: 13A13, Global Debut
Official global orders will open in January 2026. Reserve now for priority production.
60% Energy consumption reduced, 100 tons clamping force, friendly to both wallet and Earth.
2.Small body, big appetite.
Mold installation height: standard 250 mm, can be raised up to 450 mm, and large molds can also be laid flat.
The side door and the upward-moving clamping cylinder allow easy access to the mold and ejector pins, with an optional eccentric ejector pin available. The worktable height is 900 millimeters for comfortable operation!
3.Saving electricity = Saving money
Standard equipped with Aborg servo hydraulic ASH, minimizing idling losses to the maximum extent.
Energy consumption reduced by 60%
Water-cooled servo motor, stays "cool" even in summer.
4.Manual or fully automatic, one-click switch.
Both six-axis or linear MULTILIFT robots can be integrated.
Simple gate extraction, complex IMD labeling, laser marking, insert molding embedding... all can be accommodated.
Turnkey System ExpertCE certified injection molding machines, peripheral equipment, and automation one-stop packaging, ready for immediate production upon installation.
5.On-site sample demonstration
Car remote key shell
100% recycled PC/ABS (environmentally friendly bonus)
In-mold labeling IMD + laser marking + automatic assembly
< 20 seconds, full inspection vision system, 0 ppm defect rate
【Copyright and Disclaimer】The above information is collected and organized by PlastMatch. The copyright belongs to the original author. This article is reprinted for the purpose of providing more information, and it does not imply that PlastMatch endorses the views expressed in the article or guarantees its accuracy. If there are any errors in the source attribution or if your legitimate rights have been infringed, please contact us, and we will promptly correct or remove the content. If other media, websites, or individuals use the aforementioned content, they must clearly indicate the original source and origin of the work and assume legal responsibility on their own.
Most Popular
-
Chuan Jinheng Auto Safety System Jinzhou Factory Catches Fire
-
Leapmotor B10 Officially Shipped Overseas, Launching In Europe At Munich International Motor Show In September
-
Asahi Kasei, Mitsui, Mitsubishi Establish New Company! Sinopec, BASF Already Positioned
-
EU Lifts Tariffs on US Polyethylene and Other Products in International Chemical Trade Relations
-
Mega Ton Project Mechanical Completion! Review of South China Large Ethylene
