VERI5000

In today’s litigious world, verification and documentation are essential. The VERI5000 AVD™ provides a proof-test and documentation through the new Hydrajaws App. This new app makes it easy to document proof-tests and comes with a free 30-day trial. Standards for Personal Fall Arrest Systems are often confusing and left to interpretation.  Therefore, VERI5000 has provided a guide to help you make an educated decision based on the standards and equipment you are using. What To Proof-Test To and Why What method are you using to confirm the strength of different anchors you are using? How do you confirm they are installed properly? AVDs can verify the strength of many structural anchors. Anchor Tester Kit VERI5000 is authorized to sell products anywhere in North America. For pricing outside of North America, please contact Hydrajaws U.K. at http://hydrajaws.co.uk/ or by phone +44 (0)1675 430 370. For any inquiries, questions or comments, please call (720) 446-5880 or fill out the following form: 3700 East 41st Avenue Denver, Colorado 80216 www.veri5000.com customerservice@veri5000.com Tel: (303) 537-5832 PROOF-TEST SAFELY VERI5000™ requires the user to read the manual in its entirety prior to use of the equipment. User should wear appropriate personal protective equipment when performing a proof-test. After each proof test a Competent Person or person who has been trained as a Competent Equipment Inspector must inspect the equipment for cracking, breaking, or permanent deformation of the structure and equipment (OSHA 1910.66 and 1926.502) If the Equipment Inspector or Competent Person is inspecting another manufacturers product that he or she has not been trained on, they must refer to the manufacturer’s instruction manual for the proper inspection of the anchor. Some anchors may deform during a proof-test and still hold, therefore meeting their intended purpose.  Please consult the Manufacturer of the anchor with any questions on the product and as always, remove any deformed anchors from use. When choosing what to proof-test to, picking the lowest force that meets the requirements will greatly reduce the risk of breaking, cracking or deforming anchors.  Pulling anchors to the maximum of 5000lbs may deform the anchor. VERI5000 and or Hydrajaws are not responsible for any damage to the structure being tested.