Rega

The Rega RX-THREE speaker gives you full-blooded hi-fi sound into your living room. It is easy to be charmed by the good sound from the Rega RX-ONE speaker. If, however, you want more punch and depth in the bass, listen to the Rega RX-THREE speaker. It is well in the category "small floor speaker" and is designed for a placement close to a back wall. The recipe for the good sound contains, Rega's own units and a simple quality crossover. One of the advantages of Rega developing their units themselves is that they can design the units with the electrical properties they want. This means that the crossover does not have to correct for errors in the units, and thus can be designed more simply. The bass on the side is thus equipped with an eight-layer voice coil, so that it in this way integrates optimally with the two other units without using correction in the filter. RX-THREE speaker is despite its modest size, a speaker with a large adult sound, a precise deep bass, that just makes you want to hear more music. It is obvious to pair the RX-THREE speaker, with one of the award-winning Rega Brio R or Elex R amplifiers and connect it all together with a quality speaker cable such as Rega DUET. If you have fallen for the RX-THREE sound but want a higher sound pressure, listen to the big brother RX-FIVE model. System 2.5 way Cabinet Construction 18mm MDF Real wood veneer Cabinet design Band pass enclosure Dimensions (cm) H x W x D 80 x 16 x 25.8 Weight (each) 11.5 Kg Reflex Port Front ported Impedance Nominal 6 ohms Sensitivity 89 dB Power handling 100w per channel* High Frequency unit Rega ZRR Mid/bass driver (doped cone) Rega DX-125 Side bass driver Rega RR125.8 *Power handling figures are quoted as a guide. Amplification between 30w and 500w can be safely used depending on the quality of amplification. To ensure adequate clearance and prevent damage to the front facia, the grille magnets must locate directly onto the drive unit fixing bolts.