Smart Manufacturing Accelerates Again! Sumitomo and ACMT Join Forces to Usher In a New Era of AI “Digital-Analog Resonance”
On May 20, 2026, Sumitomo Plastic Machinery (Shanghai) Co., Ltd. Suzhou Branch (Sumitomo) and the Taiwan Association for Computer-Aided Mold Technology (ACMT) officially signed a memorandum of cooperation for a technology partnership alliance. The two parties will work together to promote an intelligent injection molding solution covering the full process from “mold T-zero mass production” to “high-quality injection molding production.”
This collaboration will deeply integrate Sumitomo's advanced injection molding technology "AI Molding 2.0" with ACMT's "SMART Molding" intelligent molding platform, using "loop-chain symbiosis" and "modular resonance" as core pathways to build a data-driven, self-optimizing new ecosystem for intelligent manufacturing.
Attendees at the signing ceremony:
Suzhou Branch of Sumitomo Plastics Machinery (Shanghai) Co., Ltd.
Deputy General Manager Zhang Zhenkun
Chairman Cai Minghong of the ACMT Association
Chairman of ACMT Association, Cai Minghong (left)
Deputy General Manager of Sumitomo Suzhou Branch, Zhang Zhenkun (right in the photo)
核心战略：从“圈链共生”到“模数共振”
The core strategy of this collaboration lies in:
"Circle-Chain Symbiosis": Achieving horizontal collaboration between the industrial ecosystem and the supply chain.
“Modulus Resonance”: driving the deep integration of AI models with factory data, machine data, mold data, material data, and end-to-end manufacturing process data.
Through the collaborative promotion of AI models and manufacturing data, a virtuous cycle of "data → AI models → application scenarios → new data" is formed, fully empowering new industrialization.
“Modal-Number Resonance” Dual-Engine Drive Reshapes Injection Molding Manufacturing Logic
The collaboration plan is powered by a dual-engine approach: Sumitomo AI Molding 2.0 and the injection molding MES system. The former, as intelligent hardware, uses AI models to automatically adjust injection parameters, enabling dynamic resonance between materials and machines; the latter, as the brain of the factory, connects data across the entire manufacturing process and builds full lifecycle traceability. Together, the three work in synergy to drive the manufacturing model from “experience-based machine setup” to “data-driven self-adaptation.”
Five key values empower industry upgrading.
The technical cooperation between the two parties will bring the following key value to the injection molding industry:
Establish mass production parameter benchmarks from T0 trial molding.Reduce the costs associated with repeated trial molding and mold modifications.
Process Visualization and Quality Predictability ImprovementTransform quality from “experience-based judgment” to “data-driven prediction.”
AI closed-loop control achieves high-quality and stable production.Achieve fully automated optimization of “sensing → judgment → correction.”
NPI import speed has been significantly improved.Standardize the new product introduction process to shorten the development cycle.
Process knowledge assetization and cross-factory replication capability:Supports rapid deployment across machines and factories.
Co-build a closed-loop optimization architecture to bridge the gap between mold development and mass production.
The two parties will integrate the SMART Molding process mechanism model, data feature engineering, and the real-time adaptive control capabilities of AI Molding 2.0 at the equipment end to build a closed-loop optimization architecture oriented towards "T0 mass production-oriented design." This will enable trial mold data to be directly converted into baseline parameters for mass production, driving the injection molding industry from "trial-and-error orientation" toward "data-driven" development.
Looking to the Future
Through this collaboration, Sumitomo Injection Molding Machines and ACMT will jointly drive the injection molding industry’s transition from a “trial-and-error” approach to a “data-driven” model, leveraging AI to empower green decarbonization and the digital resilience of global supply chains, and comprehensively support the development of new industrialization.
Suzhou Branch of Sumitomo Plastic Machinery (Shanghai) Co., Ltd.
Sumitomo Plastic Machinery (Shanghai) Co., Ltd. Suzhou Branch is the core enterprise of the injection molding machine business under the Sumitomo Group, and AI Molding 2.0 technology represents its cutting-edge achievement in the field of intelligent injection molding.
About ACMT
The Taiwan Association for Computer-Aided Molding Technology (ACMT) has long been committed to promoting the exchange of molding technology and the intelligent upgrading of the industry. Its SMART Molding intelligent molding platform provides comprehensive process optimization and data services for the injection molding industry.
【Copyright and Disclaimer】The above information is collected and organized by PlastMatch. The copyright belongs to the original author. This article is reprinted for the purpose of providing more information, and it does not imply that PlastMatch endorses the views expressed in the article or guarantees its accuracy. If there are any errors in the source attribution or if your legitimate rights have been infringed, please contact us, and we will promptly correct or remove the content. If other media, websites, or individuals use the aforementioned content, they must clearly indicate the original source and origin of the work and assume legal responsibility on their own.
Most Popular
-
A Look at the Material Suppliers Behind SpaceX
-
Government's Triple Action, Enterprises' Three Arrows in Five Days, Semiconductor Reshuffle! What Signal Does Japan's Chemical Industry Release?
-
Fire breaks out at jiangsu meiside!
-
Name change without tax change: POM Anti-Dumping Duty Rate Inheritance Implemented
-
Ethylene: Production Capacity Accelerates Expansion, Global Industry Landscape Is Being Reshaped
