• The device includes a feeding mechanism and a conveying mechanism, with the extruder die head accurately connected.

• The feeding mechanism includes a feeding hopper and a built-in high-efficiency stirring component.

• The mixing component is driven by the first motor, transmitting power through the first rotating shaft.

• The upper part of the rotating shaft is equipped with scrapers to break up clumped raw materials, and multiple stirring rods are installed in the middle and lower parts;

• Ensure that the raw materials are thoroughly mixed after passing through the sieve, achieving a uniform and lump-free state;

• to lay the foundation for extruding high-quality, uniformly excellent color masterbatch strips

• The water cooling pool is equipped with two pairs of splicing tables, each with guide grooves for the precise insertion of strip products.

• The splicing table can be slidably adjusted, moving closer to or farther from each other;

• water cooling pool equipped with drive components precisely controls the sliding movement of the splicing table;

• Enhance device flexibility, quickly locate and handle tape breakage issues, improve processing efficiency.

The device is composed of three main parts: feeding mechanism, weighing structure, and material transfer mechanism.

• Weighing structure is located below the outlet of the hopper;

• The material transfer mechanism includes components such as a hydraulic cylinder, a second motor, a connection plate, and a placement board.

• The turntable is connected to the output end of the first motor to achieve automated feeding;

• placement boards are specially set with slots, multiple placement boards are evenly connected to the outer side of the connection plate;

• The second motor works in conjunction with the hydraulic cylinder to ensure a stable and efficient material transfer process;