Tub Topper

The Tub Topper® is manufactured and located in the United States. The Tub Topper® was invented by a dad of two small children who wanted a solution for a nightly soaked bathroom floor! “The Tub Topper® was invented when I couldn’t find a solution to a constant (literally nightly) problem. After water damage finally took its toll - it was time to figure something out. From cardboard and duct tape, with perseverance and faith in God's guidance - it became a finished product. The Tub Topper® has worked wonders for us, and now thousands of others. It was designed to stay on the tub, and keep the water in - a simple idea, which there was no answer for. The large play area allows kids to let their imaginations run wild, all while the water flows back into the tub, not out. Fun for kids, and a mess-saver for parents!” The Tub Topper® is a bathtub splash guard meant to provide children a place to play with their bath toys on the edge of the bathtub. Ten suctions cups provide an extreme hold that will stick to the top and inside wall of the bathtub. The Tub Topper® hugs the bath tub edge so water can't splash, or leak, underneath the product. A lip goes down into the tub so water will pour back into the tub, not out! The Tub Topper® extends out past the bathtub edge to give kids more area to play with their toys. It's also 3 feet in length to give a maximum zone of fun, while still allowing room to enter and exit the bathtub safely. The tall walls around the play area act as a water barrier to keep water in the tub and off the floor.