Supa Peg

We manufacture a wide range of camping accessories like awning, poles, pegs, ropes and other handy camping equipment for: 4WD, Camper Trailer, Camper Van, RV, Trailers and other outdoor recreation vehicles. If you are a regular camper, on the road all the time or just want a quality Australian made awning that will last the distance then this is the ideal awning for you. Backed by a 2 year Australian warranty, these awnings are guaranteed to give you a trouble free experience. The latest Supa Peg Awnings have all the features that you need to make your camping trip easy and comfortable. All poles are now integrated into the awning ensuring that you don’t lose them. This also makes for a quick setup and set down. We were the first to include the peggable foot into our awnings allowing you to set up on hard ground without the need for guy ropes. Our awnings are all designed to create fall so in those heavy down pours and windy conditions you don’t need to pack up and make a run for it. This is due to our clever horizontal hinging system. Low profile and with the ability to flex allowing for the awning to pitch down. All our awnings have the ability to add walls via zips or Velcro depending on the model of awning. Supa Peg awnings are made with quality Australian Made canvas from Wax Converters Textiles Australia in Rutherford NSW. This canvas has been designed and tested to withstand our Australian climate and that is why it is used extensively in our awning products. It is a dyna-proofed 8oz canvas with a woven tear stop pattern to keep in light and strong. Ideal for awnings manufactured in Australia. The canvas is mould and mildew resistant and will not require any additional proofing for 2 years from new. It has a 37% cotton content which means air can pass through it while still being water proof allowing for the material to be cooler and quick drying unlike 100% polyester awnings. We use a neutral grey colour that will suit any colour vehicle. All our Australian made awnings use a black tonneau bag with a quality zipper to secure the awning while travelling. This type of material will out last standard vinyl bags that will breakdown in the sun over a short period of time. All aluminium used in the frame work of our awnings is hard structural anodised, meaning that it will not leave black marks when rubbing on canvas and it will not stain when it gets wet and dries out. You can be guaranteed that your awning is 100% made in Australia from the cutting to the sewing and finally the assembly and packaging. Supa Peg manufactures all its own plastic componentry in our factory at Yatala which is used in the production of our awnings. This gives you the peace of mind that your 4WD awning is fully repairable for that unforeseen situation.