Spectite® Measurement and Control Inc.

Spectite® Sealed Feedthroughs for Pressure and Vacuum Applications Prevent liquids and gases leaking under pressure and stop sensors, electrodes and wires moving due to differential pressure Single Element Feedthroughs Seal on probes, sensors, small-bore tubes and other similar elements. Multiple Element Feedthroughs Saves time and costs by allowing multiple sensors to pass through one feedthrough fitting. Feedthroughs for Multiple Wires and Probes Different types of these assemblies may be specified according to the type of element required to pass through the feedthrough. High Density Sealed Tubes High density, insulated wire sealed feedthrough tube assemblies, carrying up to sixty 24 AWG wires. Bearing Sensor Feedthroughs For sealing individual sensor or instrumentation wires exiting an oil filled bearing enclosure to prevent oil migrating along the sensor leads. Autoclave Sensor Feedthroughs For use within sterilising and composite autoclave applications, sealing multiple sensor or instrumentation wires exiting an enclosure. 2kV High Voltage Electrode Feedthroughs with Ceramic Insulator The integral electrode mounted in these feedthroughs enables specifiers to pass voltages up to 2kV. 8kV High Voltage Electrode Feedthroughs with PTFE Insulator The integral electrode mounted in these feedthroughs enables specifiers to pass voltages up to 8kV. 8kV High Voltage Electrode Feedthroughs with PEEK Insulator The integral electrode mounted in these feedthroughs enables specifiers to pass voltages up to 8kV.