Rolapal

Rolapal Technologies is a company that manufactures and exports innovative Mobility & Assistive Technology products to help those with disabilities. Bubble contour refers to the unique shaping of Dreamline foam contour profile. Bubble Contour foam design Technology is designed to remove the tension in the foam cell structure to increase immersion and mimic the contour of an air cushion ballooning under load. The unique front-to-rear curvature of the “bubble contour” cushion naturally forms a pre-ischial shelf wherever the individual is sitting on the cushion to automatically reduce the potential for forward pelvic migration. The gentle forward slope at the front of the cushion relieves pressure under the thighs behind the knees, promoting increased blood flow to the lower legs and feet. Woven Air is the unique weaving of air tubes through a pocket with sleeves (the Air Pocket). Cushions are divided into 4 regions (quad) with real dynamic air flotation throughout each section maximizing pressure management. There is no ongoing inflation or maintenance with Woven Air. The air tubes are sealed and retain air throughout their lifespan. Soft Polymer gel beans, which mimic the body's soft tissue density and elasticity, are mobilized in a slow-moving fluid inside sealed packs for dynamic pressure management. The gel and fluid mobilizer are not affected by heat, remaining consistent in flow and cushioning throughout hot and cold conditions. The BAC system is a series of miniature pads which attach to a rear shell, which in turn is inserted inside the cover behind the foam inner of a backrest. The miniature BAC pads can be layered in infinite orientation, position, and depth. This unique device can be adjusted to the asymmetrical contours of the individual, enabling custom backrest designs with the ability to alter or reverse the customizations at any time during its lifespan. The Expander unique cover system has expandable zip-up zones, so the cover adjusts in shape to match asymmetrical contours of a custom shaped backrest. This compact locking swing-away hardware is ambidextrous, has two modes of operation (lift tab or depress button) depending on the preference or ability of the individual, and is infinitely adjustable to suit the exact support position required. Durability proven over many years; the Dreamline U2 backrest hardware is intuitive to use with few components and reliable. The comfort layer over the STX2 and G7 cushions flows over customized contours of the structural foam base of the cushion, has frontal ties to inhibit migration during transfers, and contains a rear zip-up pocket to which gel packs or air cells can be inserted and protected from the movements of the individual. Dreamline STX Backrests have multiple stackable Visco-elastic Sunmate foam filled pillows which can be multi-layered and repositioned anywhere on the backrest to accommodate asymmetrical body shapes comfortably. The soft memory foam structure reduces the need for accuracy in positioning as they simply mold to the shape of the user. The Rolapal tilt-in-space wheelchair tilt rail design incorporates a multiple radius curvature in a single track enabling the wheelchair to tilt from -10 degrees anterior tilt through to 50 degrees posterior tilt in a single operation without special setup and has a very low floor to seat height reducing the center-of-gravity. The Rolapal tilt-in-space wheelchair tilt locking system is fully cable free and internal to protect the tilt rollers and locking mechanism from spills, fluids, weather, and reduces the risk of finger impingement.