Shuoxing Rubber and Plastic produces nylon shaft sleeves, adjustment spacers, nylon washers, nylon bearings, plastic sleeves, nylon products, and plastic parts. Our company manufactures various specifications of MC nylon shaft sleeves, MC nylon rollers, MC nylon idlers, MC nylon rods, MC nylon sheets, and other products. MC nylon products (i.e., cast nylon) are widely used engineering plastics that are found in almost all industrial fields. Cast nylon is produced using an anionic polymerization reaction technique, in which molten caprolactam monomer, with a catalyst added, is poured into molds of various shapes at atmospheric pressure to form cast products. The molecular weight of MC nylon can reach 70,000 to 100,000, which is three times that of common nylon (such as nylon 6 and nylon 66), making its comprehensive mechanical properties much better than those of other nylon materials. MC nylon products, or cast nylon, are widely used engineering plastics that are found in almost all industrial fields. Cast nylon is produced using an anionic polymerization reaction technique, in which molten caprolactam monomer, with a catalyst added, is poured into molds of various shapes at atmospheric pressure to form cast products. The molecular weight of MC nylon can reach 70,000 to 100,000, which is three times that of common nylon (such as nylon 6 and nylon 66), making its comprehensive mechanical properties much better than those of other nylon materials. It has the following five characteristics: 1. Outstanding wear resistance: The coefficient of friction usually ranges from 0.1 to 0.3, about 1/4 that of phenolic plastics and 1/3 that of babbitt alloys, making it a self-lubricating material. 2. Good mechanical properties: It has high surface hardness, significant tensile and bending strength, impact strength, and considerable ductility. Its compressive strength is comparable to that of metals, and its fatigue strength is on par with cast iron and aluminum alloys. 3. Excellent chemical stability: It is unaffected by weak bases, alcohols, esters, copper, and hydrocarbon oils. 4. Wide resistance to heat and cold: It can maintain certain mechanical strength at -60°C and has heat resistance in the range of 80-100°C. 5. Light weight: Its specific gravity ranges from 1.15 to 1.19. Contact number: 13589901318 Shuoxing Rubber and Plastic