【Product Introduction】
AMS-99 Glass Insulation Coating is a room temperature self-drying brush coating with high cost performance. It integrates various advantages of coatings and is a versatile product suitable for general working conditions. The coating features intelligent spectral selectivity and stability, high film hardness, good transparency, excellent performance in blocking infrared and ultraviolet rays, energy-saving, environmentally friendly, flame-retardant, sound-insulating, long service life, water-resistant, acid and alkali resistant, easy to apply, and convenient for promotion.
【Main Performance Parameters】
|
Indicator Name |
Performance Parameters |
|
Appearance |
Blue liquid (two components) |
|
Main Component |
Nano Insulation Medium |
|
Insulation: Infrared Blocking Rate |
≥85% |
|
pH Value |
7.0±0.5 |
|
Specific Gravity |
0.9 g/cm3 |
|
Transparency: Visible Light Transmission Rate |
≥80% |
|
Ultraviolet Blocking Rate |
≥98.9% |
|
Hardness |
5-6H |
|
Adhesion |
Level 0 |
|
Noise Reduction |
15-20 decibels
|
|
Coating Thickness |
4-5μm
|
|
Film Service Life |
20 years |
|
Application Area |
40m2/L |
Main Uses:
Used for energy-saving renovation of building glass to reduce energy consumption.
Applicable to building glass, solar glass, glass curtain walls, hotels, office buildings, private residences, exhibition halls, etc., to improve comfort and energy efficiency.
Used in vehicles such as cars, trains, airplanes, and ships for glass insulation and UV protection to enhance comfort and energy efficiency.
Used on indoor glass requiring UV blocking and shielding.
【Usage Instructions】
Clean the glass surface to be treated thoroughly before application, ensuring it is dry and free of moisture.
Mix components A and B according to the product instructions, stir slightly, and let it cure for 10-20 minutes before use.
Prepare a sponge scraping tool and dipping tray, pour the coating into a clean dipping tray, dip an appropriate amount of coating, and scrape from top to bottom for application.
Use the mixed components within 4 hours; otherwise, the viscosity of the coating may increase, making it difficult to use.
【Precautions】
1. Selection of Application Surface:
For single-layer glass: both indoor and outdoor surfaces are acceptable.
For double-layer glass, application should be on the outdoor surface.
2. Transportation and Storage Methods:
Store the product in a cool place as much as possible.
Effective for three months at an ambient temperature of 25-35 degrees.
Effective for six months at an ambient temperature of 5-15 degrees.
3. Applicable Substrates:
Transparent glass, transparent acrylic, transparent PET, transparent PP.
Protect during use to prevent ingestion or contact with eyes.
【Packaging Specifications】
1/2/20 liters
