Nanotech Spirit base Is a solvent free silicone concentrate that is based on silane/ silxane and used diluted with organic solvents. It is an organic solvents and a high quality general purpose water repellent impregnating and priming mineral and highly alkaline substrates. Features and characteristics • Good penetration capacity • High alkaline drying • Tack free drying • Water repellence develops fast • Effective even on damp substrates • After application NANOTECH SPIRIT BASE reacts with the atmospheric pressure or pore water in the substrate, thereby generating the active ingredient and liberating alkaloid. • The active ingredient lowers the water absorbency of the substrate. • Since neither pores nor capillaries are clogged, the substrate detains a very high degree of water vapour permeability. Read More Nanotech is a solvent free waterproofing that is based on silane / siloxane mixed with the secret positive and negative organic solvent. Siloxane based concrete sealer penetrate into the substrate have many advantages over surface sealers such as acrylics, silicone and epoxies. The siloxane bond chemically to the pores inside and below the surface of the brick and masonry substrates. This keeps liquid water from entering into the brick. Also, since the Nanotech sealer penetrates deeply, UV rays cannot degrade the Nanotech sealer. The penetrating sealer is below the masonry surface so it will give a long life. Excellent for high traffic areas penetrating below the surface will not lose protection from high use. Surface sealer remains on top of substrate and erode from use. Also the substrate will maintain its NATURAL TEXTURE and matt or sheen with a penetrating siloxane sealer. Storage Must be stored in tightly sealed container at room temperature. Store away from direct sunlight. For optimum results use before expiry date. Should NANOTECH SPIRIT BASE to be used after expiry date, it is not necessarily unusable but a quality control check should be performed on the property to be treated prior to relevant application. Surface penetration Surface should be clean, sound and dry prior to application. Intended uses • Foundation injection • Concrete slabs • Pools • Sandstone • Sand lime brick • Marble • Granite • Brick • Mineral plaster • Concrete and reinforced concrete • Treatment on rising and lateral damp Application details Suitable for imparting water repellence to absorbent and mineral building materials. e.g • All kinds of concrete • Mineral plaster • Cement fibre boards Freshly impregnated materials should be protected against immediate of rain. Repeated treatments must be avoided on materials already tried, as these materials could not absorb the solution. • Sand line brick work • Brick work • Aerated concrete • Mineral based natural and artificial stone mineral paints • Suitable as a primer for exterior paints • Not suitable for rendering gypsum water repellent.