Watertech Pipes & Fittings Pvt Ltd is one of the leading manufacturers of HDPE/PE Pipes & Fittings including other plastic pipes like uPVC, PVC Garden Hoses, PPRC Pipes & Fittings in KPK, Pakistan. We are acknowledged as a quality producer and a market leader by all our valued customers. All our production is based on PS and ASTM & DIN Standards. All our products are certified by ISO 9001 2015 both for its quality assurance and management. Watertech High-Density Polyethylene Pipes and Fittings is an efficient and cost-effective solution for a broad range of water transportation and management in irrigation, municipal, industrial, marine and agricultural it has been tested and proven effective for above ground, surface, floating, and sub-surface marine applications. High-density polyethylene pipe (HDPE) can carry potable water, wastewater, chemicals, hazardous and compressed gases. HDPE has the lowest repair frequency per mile of pipe per year compared with all other pressure pipe materials used for urban water and gas distribution. Polyethylene is a strong, cost-effective, tough, and very durable and reliable solution as compared to GI and other pipes. Standard Specification Watertech HDPE/PE pipes are made according to international standards such as ISO-4427 & 4437: 1996, DIN 8074/8075 & PS -3580: 1997 specifications, manufactured in state of the art plant with latest manufacturing technology under strict quality control through state of art lab facilities. Watertech HDPE pipes operating pressure range between PN-6, PN-8, PN-10, PN-12.5, PN-16 &PN-20. Diameter Range: 20mm   |   25mm   |   32mm   |   40mm   |   50mm   |   63mm   |   75mm   |   90mm   |   110mm   |   125mm   |   140mm   |   160mm Coils Length: 20mm to 50mm in 500 feets 63mm to 90mm in 100 meters Coils 110 mm to 160mm in 4 and 6 meters lengths WATERTECH HDPE/PE Pipes operating pressure range between PN-6, PN-10, PN-12.5, PN-16 WATERTECH HDPE/PE Pipes and Fittings have a State of Art testing laboratory equipped with the latest and modern equipment. We have the following testing facilities available in the laboratory. Melt Flow Rate Heat Reversion Test Density Tensile Strength Checking Test Hydrostatic Pressure Test Elongation Test WATERTECH PE Pipes are made from PE 100 black compounds sourced from the finest manufactures. WATERTECH HDPE/PE contains carbon black as a UV stabilizer which is one of the most efficient and widely used UV absorbers. Carbon black converts harmful ultraviolet radiation into harmless infrared radiation or thermal energy, which dissipates through the polymer matrix neutralizing the harmful effect of UV. Thus, Watertech HDPE/PE is UV resistant and safe to use in exposed conditions. WATERTECH PE pipes for potable water applications are manufactured according to the latest international standard ISO 4427-2(E): 2007 PE pipes for water supply specification DIN 8074/8075 and PS-3580:1997. Fittings are compatible with ISO (or metric) dimension pipe and conform to the following specifications; PP Compression fitting: ISO 3458, 34859, 3501, 3503, & B5:5114 PP Butt Fusion fittings: DIN 16963 Max. The working pressure of Watertech HDPE pipes ranges from 6, 8, 12.5, and PN 16 bar. The nominal pressure (PN) corresponded to the maximum allowable working pressure in a bar for the pipe at 20°C, including pressure surge. Adequate Surge allowance must be taken into account by a pipeline designer. Max. Working Pressure for Watertech HDPE & PE Fittings 10 bar (Compression Type) 8-16 bars (Butt Fusion Type) Cold Bending Radii (CBR) CBR in meters at 20°C = 22 x Outside Diameter of pipe. Cost-effective and long life Leak-Free fully restrained joints Easy and quick installation Fatigue resistance and flexibility Lightweight Construction advantages Low-pressure loss Excellent flow characteristics Hydraulically efficient Temperature resistance High impact resistance Don’t alter the odor and taste of water Not affected by underground movement. The high rapid crack propagation system Blacked color pipes are UV resistance Ductility Dimension of Pipe PE 0 100 (Din N – 8074 & 75, ISO – 4427 & 37) Watertech Pipes & Fittings Pvt Ltd, located in Gadoon Economic Zone Swabi, KPK Province is a large scale enterprise manufacturing uPVC Pressure Pipes, Non-Pressure Sewerage and Electrical Conduit Pipes, PVC Garden and Gas Pipes, PPRC Pipes & Fittings and HDPE/PE Pipes. All Watertech Products are made with the latest and advanced Italian, German and Chinese Plants.