Walton was born as a company producing Hydraulic and Pneumatic Actuators. After years of experience in this field, it has also specialized in the sector of precision mechanical machining for third parties. Machinery The availability of a state-of-the-art machine park, such as: 3-axis AR CNC machining center with work surface 1500 x 700 mm; 4-axis AR CNC machining center with work surface 1500 x 700 mm; Mori Seiki lathe with Ø40mm bar passage and equipped with automatic bar feed; Mori Seiki lathe with Ø65mm bar passage and equipped with automatic bar feed; Mig and Tig welders; NEW - Arriving 5-axis machining center: CNC FIDIA high speed with work surface 500 x 870 mm Machining The machining that we can perform are: Machine-side programming or via CADCAM using 3D drawing; Execution of molds for thermoplastic and die casting of small and medium sizes; Execution of molds for deep drawing and stamping. The materials that can be worked are both metallic and plastic in nature. ACTUATORS Features The functional concept is that of the simple T-lever, on which the thrust of the supply fluid is applied directly, without dispersive transformations of motion. This made it possible to realize constant couples throughout the rotation arc while maintaining characteristics of extreme compactness. The basic element that allowed this type of realization is the sealing system (patented), consisting of a static resilient seal, vulcanized directly into the die-cast body of the actuator, capable of offering a total absence of drainage and the possibility of being powered both with air and with liquids. Features The actuator is composed of two semi-bodies and a paddle resistant to most corrosive agents. It can be powered by: compressed air; water; solutions, aqueous emulsions or hydraulic oils. The maximum permissible pressure is 20 bar and can operate with a temperature range between -20°C and +60°C in the standard model, and up to 120°C in the HT model (high temperature). The actuators can be supplied with rotation angles of: 90° (models 5.S and 5.T); 120°(models 7.S and 5.T); 180°(models 10.S and 5.T); Accessories Furthermore, it is possible to supply our products combined with a series of accessories, such as: position limit switches, manual emergency drives, solenoid valves, external mechanical limit switches, hydraulic oil pump, pneumatic positioners, pneumatic return and special shaft outputs. The absence of intermediate kinematics makes it practically maintenance-free and assembly can occur in any position.