Water treatment additives play a critical role in maintaining the health of closed loop water systems. These systems are commonly used in industrial applications such as cooling towers, boilers, and HVAC systems. Closed loop water systems require careful management to prevent corrosion, scaling, and biological growth that can lead to system failures, reduced efficiency, and increased maintenance costs. In this blog post, we will explore five types of water treatment additives for closed loop systems: corrosion inhibitors, de-scaling agents, de-sludger, anti-freeze glycol, and non-potable biocides. Corrosion Inhibitor Corrosion inhibitors are a common type of water treatment additive used to prevent corrosion in closed loop systems. These additives work by forming a protective film on the metal surfaces of the system, preventing corrosion, and extending the life of the system. Common types of corrosion inhibitors include zinc, molybdate, and nitrite. Find out more about the X-PO10 Commercial Inhibitor De-scaling Agent Scaling occurs when mineral deposits build up on the surface of the system, reducing flow and efficiency. De-scaling agents are water treatment additives used to prevent or remove these deposits. These additives work by breaking down the mineral deposits and preventing them from forming again. Common types of de-scaling agents include phosphoric acid, citric acid, and hydrochloric acid. Find out more about the X-PO20 De-Scaling Agent De-sludger Sludge is a build-up of organic matter and other contaminants that can accumulate in the closed loop system, leading to reduced efficiency and equipment failure. De-sludgers are water treatment additives that work by breaking down and removing sludge from the system. These additives help to improve the efficiency of the system and extend the life of the equipment. Find out more about the X-PO40 Heavy Duty De-sludger Anti-Freeze Glycol In colder climates, closed loop systems can be at risk of freezing, which can cause damage to the system. Anti-freeze glycol is an additive that is added to the water to lower its freezing point, making it less likely to freeze. It is important to use the correct concentration of anti-freeze glycol, as too much can reduce the efficiency of the system. Find out more about the ready-mixed X-PO50 Anti-Freeze Glycol or the concentrated X-PO55 Anti-Freeze Glycol . Biocide Non-potable biocides are chemicals used to control the growth of microorganisms, such as bacteria and algae. In closed loop water systems, microorganisms can multiply and form biofilms that can lead to several issues such as corrosion, fouling, and reduced heat transfer efficiency. Non-potable biocides are used to control the growth of these microorganisms and prevent these issues from occurring. It’s important to note that non-potable biocides should be used in accordance with local regulations and industry standards, as they can have potential health and environmental impacts if not used properly. Find out more about the X-PO80 Non-Potable Biocide . X-PO Water Treatment Additives The VEXO X-PO range is a collection of system inhibitors, treatment agents, and disinfectants designed specifically to meet the rigorous energy and water-saving protocols, system protection, and additive safety requirements of modern building industry standards. The range provides a comprehensive selection of additives to meet all the hygiene and system protection needs of any size heating, chilling, or condenser water system. The aim of the VEXO X-PO range is to reduce energy and water wastage, making it the most cost-effective option available.