In addition to standard sludge dewatering lines, our company is also able to place the line on the chassis of a truck, or on a separate trailer or semi-trailer. Such a solution is primarily intended for: for municipal and industrial wastewater treatment plants, where it is necessary to drain sludge at several points, for sludge dewatering at treatment plants with less sludge production, for which a stationary sludge dewatering line would be financially unavailable. The performance of the device, the content of solids at the outlet and the consumption of powdered flocculant depend on the parameters of the dewatered sludge, the type and dose of the powdered flocculant used and the quality of service. The input and output points of individual media are designed with regard to the quick start-up of the mobile device, or into transportable condition. The sludge and rinsing water inlets are terminated with quick couplings. List of moving line components with their brief description: Belt press sludge dewatering, Flocculation device mixing sludge with poly electrolyte solution, Air control panel VX-VOP device controlling compressed air, Chemical economy VX-CHH-DA-atyp. automatic preparation of flocculant solution and its dosing, Compressor providing compressed air for the belt press, Sludge pump pumping sludge into the belt press, Belt conveyor sludge cake drainage, Flush water pump providing pressure water for cleaning the filter belts of the press, Main distribution board VX-R control and power supply of all electrical elements of the line, Sludge storage tank ensuring sufficient sludge for pressing when pumping sludge into the press with an external pump and removing large unwanted parts from the sludge (protection of the internal pump and press), Plastic tank under the press ensures the use of the leaking filtrate for washing the sieves.