PVC drip edge, also known as eagle beak net, is a measure to prevent rainwater from flowing down the wall into the balcony or onto the glass. It is generally installed at the junction of the bottom surface and the outer wall, 1-2 cm away from the corner. After using the drip edge, the water is interrupted and will not flow inward. It is suitable for building projects where there are requirements to block dripping water, such as window sills, window heads that protrude from the outer wall, including non-protruding window tops, awnings, balconies, coping of parapet walls, and protruding waistlines on outer walls. All these areas need to have drip edges.
Common specifications for PVC drip edges:
1．PVC drip edge width: 25mm x 30mm
2．PVC drip edge length: 2m ― 2.5m
3．PVC drip edge mesh width: 100mm x 100mm
4．PVCdrip edge packaging: 150 pieces per box, or according to customer requirements.
Product Features:
In order to prevent rainwater from flowing back and damaging the building. Currently, most buildings use insulation boards to create eagle beak shapes. The sizes cannot be standardized, resulting in an unattractive appearance and complicated processes. Quality is difficult to guarantee, and it also generates a large amount of foam waste. Therefore, our company has developed and produced the drip edge to solve these problems.
