Brief Description:The underwater pelletizer for the plastics industry is mainly used for processing waste plastic films (industrial packaging films, agricultural mulch films, greenhouse films, beer packaging, shopping bags, etc.), woven bags, agricultural convenience bags, basins, buckets, beverage bottles, furniture, and daily necessities. It is suitable for most common types of waste plastics and is widely used and popular in the plastic recycling industry.
Underwater Pelletizer for Plastic IndustryFeatures:
The entire body is colorfully painted with a smooth finish, and the details are excellently handled.
2. The pelletizing chamber is made of 304 stainless steel plates, seamless, and can be checked by filing the edges.
3. All bearings are either Luoyang or Harbin bearings, and the cutter bearings are all imported, ensuring durability and minimal error.
4. The motor is a high-quality product manufactured by our company, far surpassing similar products.
5, The machine body is made by welding channel steel, angle iron, and steel plates. The welds are neat and wavy, ensuring a stable body that is heavier than ordinary ones.
6. All parts are made of 301 stainless steel and 204 stainless steel. They are precisely stamped and hardened, and the chrome plating is free of burrs and has a bright finish.
7, the defect is controlled within 2 lines. It is sharp and wear-resistant. It is as bright as a mirror. The grain is cut without burrs, small tails, etc.
8, The rubber rollers are brand new and wear-resistant. They are dark gray, wear-resistant, and heat-resistant. The company has imported materials, including Teflon rubber rollers, with temperature and wear resistance improved by over 100%, to meet any harsh working environment.
9. The exhaust port and feed port are 2mm thick, made of 304 stainless steel.
Operation Specifications:
1. The working temperature of the underwater pelletizing equipment is relatively high (up to 300°C), and it takes about one hour to cool down after the heat medium is stopped. Therefore, personnel working near the pelletizer must wear protective clothing and heat-insulating gloves.
2. Before starting the machine, staff should check if any rotating parts of the underwater pelletizing equipment are loose to prevent injury during operation.
3. Check if the phenolic board supporting the steel belt is severely worn.
4. Before starting the machine, the operator must manually rotate and test the outer drum to prevent overload.
5. Before starting the operation, the operator must inspect the upper and lower surfaces of the steel belt, remove any debris on the steel belt, and ensure that no foreign objects are carried into the space between the steel belt and the drum.
6. Operators must ensure that gloves, sleeves, and other clothing are neat and kept away from rotating mechanical parts, especially avoiding contact with the high-speed rotating outer cylinder to prevent entanglement and injury.
7. The material and heat medium temperatures are high; keep a safe distance to avoid burns.
8. The outer rotating drum is a thin-walled cylinder that must be handled with care. Any impact may cause deformation, leading to the loss of its pelletizing function. It is strictly forbidden to heat the outer rotating drum with fire.
9. The underwater pelletizing equipment distributor is a slender rod, and it is strictly forbidden to press or collide with it, causing deformation that would result in the loss of its pelletizing function.
10. It is strictly forbidden to start the machine without cooling water.
Underwater pelletizer for the plastics industryCleaning Precautions:
Do not touch the heating element directly with your hands.
2. Do not rinse the PET cleaning equipment with water. When the work area is wet, operators should not work barefoot.
3. Do not put your head or hands through the belt's running path during operation.
4. Please do not allow oil to adhere to the surface of the conveyor rollers.
5. Please confirm the power supply used by the machine and do not plug it into the wrong power source. This machine uses a three-phase four-wire system. The striped wire is the ground neutral wire, serving as leakage protection.
Do not replace the parts on the machine arbitrarily.
7. Key components should be frequently lubricated with oil.
Nanjing Xintuo Intelligent Equipment Co., Ltd. was established on May 29, 2020, with Zhou Xianting as the legal representative. The registered capital is 10 million RMB, and the unified social credit code is 91320113MA21LF2H92. The company is located in the Baima Town Industrial Concentration Zone, Lishui District, Nanjing City. It belongs to the other manufacturing industry. Its business scope includes: Permitted projects: import and export of goods; import and export of technology (projects that require approval by relevant departments can only be carried out after obtaining such approval, specific business items are subject to the approval results). General projects: sales of intelligent material handling equipment; research and development of machinery and equipment; general equipment manufacturing (excluding special equipment manufacturing); specialized equipment manufacturing (excluding licensed specialized equipment manufacturing); sales of metal products; wholesale of electronic components; sales of instruments and meters; sales of artificial intelligence hardware; processing and sales of mechanical parts and components; general component manufacturing; sales of plastic products; production and sales of Class I medical devices; sales of Class II medical devices; sales of health supplies and disposable medical supplies; sales of special labor protective equipment; technical services, technical development, technical consultation, technical exchange, technology transfer, and technology promotion (except for projects that require approval, activities can be conducted independently according to the business license). The current operating status of Nanjing Xintuo Intelligent Equipment Co., Ltd. is active (in operation, open, registered).
