| Physical properties |
Rated Value
|
System of Units
|
Test Method
|
|
density
|
1.42
|
g/cm³
|
ISO 1183 certification |
|
Melt flow rate (melt flow index) （190°C/2.16 kg）
|
25
|
g/10 min
|
International Organization for Standardization 1133 |
|
Melt Volume Flow Rate (MVR) （190°C/2.16 kg）
|
21
|
cm³/10 min
|
International Organization for Standardization 1133 |
|
Shrinkage Rate
|
International Organization for Standardization 294-4 | ||
|
vertical
|
1.9
|
%
|
|
|
flow
|
1.9
|
%
|
|
|
Water absorption rate
|
International Organization for Standardization (ISO 62) | ||
|
Saturated, 23°C, 2.00 mm
|
1.4
|
%
|
|
|
Balance, 23°C, 2.00 mm, 50% RH
|
0.40
|
%
|
|
| Hardness |
Rated Value
|
System of Units
|
Test Method
|
|
Rockwell hardness
|
International Organization for Standardization 2039-2 | ||
|
M Weighing Scale
|
92
|
|
|
|
R Weighing
|
120
|
|
|
|
Ball Pressure Hardness （H 961/30）
|
170
|
MPa的
Translated to English:
of MPa
|
International Organization for Standardization 2039-1 |
| Mechanical properties |
Rated Value
|
System of Units
|
Test Method
|
|
Tensile Modulus
|
3200
|
MPa的
MPa's
注：在英文中，"MPa" (兆帕) 作为单位时，通常不需要加 "'s" 来表示所属关系。如果这里指的是“MPa的”这种表述方式（即属于或关联于MPa的意思），直接使用 "MPa" 即可。如果有特定上下文需要表达所有格，则可以考虑用 "of MPa" 或者根据具体情况调整。但基于您的要求，我提供了字面翻译 "MPa's"。请确认是否符合您的需求。
|
ISO 527-1 certification |
|
Tensile stressYield
|
71.0
|
MPa of
|
International Organization for Standardization 527-2 |
|
Tensile strainYield
|
12
|
%
|
International Organization for Standardization 527-2 |
|
Nominal tensile fracture strain
|
23
|
%
|
International Organization for Standardization 527-2 |
|
Tensile Creep Modulus
|
International Organization for Standardization 899-1 | ||
|
1 hour
|
2800
|
MPa
|
|
|
1000 hours
|
1500
|
MPa of
|
|
|
Flexural Modulus
|
3000
|
MPa of
|
International Organization for Standardization 178 |
|
Poisson's ratio
|
0.37
|
|
|
| Impact performance |
Rated Value
|
System of Units
|
Test Method
|
|
Notched Izod impact strength
|
ISO 179/1eA certification | ||
|
-30°C
|
6.5
|
kJ/m²
|
|
|
23 degrees Celsius
|
7.5
|
kJ/m²
|
|
|
Unnotched Charpy Impact Strength
|
ISO 179/1eU certification | ||
|
-30°C
|
200
|
kJ/m²
|
|
|
23 degrees Celsius
|
200
|
kJ/m²
|
|
|
Notched Izod impact strength
|
International Organization for Standardization (ISO 180/1A) | ||
|
-40°C
|
8.0
|
kJ/m²
|
|
|
23°Celsius
|
7.0
|
kJ/m²
|
Finished Product Manufacturers
Finished Product Manufacturers
Finished Product Distributors
Finished Product Manufacturers
Finished Product Manufacturers
