The honeycomb inclined tube has become a commonly used sedimentation tank filler in the water treatment industry. However, the quality of the honeycomb inclined tube filler determines the lifespan of the inclined tube and whether the welding and installation are smooth. Now, Jinrong honeycomb inclined tube experts will teach you how to identify the quality of the inclined tube. There are two types of hexagonal honeycomb inclined tubes: inclined tubes and straight tubes, and they are made of three materials: polypropylene (PP), polyvinyl chloride (PVC), and fiberglass.
Application scope of honeycomb inclined tube filler:
The honeycomb inclined tube is mainly used for various sedimentation and sand removal purposes. It has been widely adopted in water supply and drainage projects over the past decade and has become a significant water treatment device. It has a wide application range, high treatment efficiency, and occupies a small area. It is suitable for sand removal at the inlet, general industrial and domestic water sedimentation, sewage sedimentation, oil separation, and tailing concentration treatment. It is applicable for both new projects and the renovation of existing old tanks, achieving good economic benefits.
Specifications and prices of hexagonal honeycomb inclined tubes: the specifications for drinking water sedimentation inclined tubes are φ35X0.45 and φ35X0.5, while sewage specifications are φ50X0.45, φ50X0.5, φ80X0.6, and φ80X0.8. The price of honeycomb inclined tubes for drinking water is higher because they must meet drinking water standards and must be made of non-toxic PP material. The price ranges from over 400 to over 500 yuan per cubic meter, while the price for sewage honeycomb inclined tubes ranges from over 300 to over 400 yuan. Dongying honeycomb inclined tube prices are reasonable, and the manufacturer provides hexagonal honeycomb inclined tube filler, honeycomb inclined tube filler prices, and information on honeycomb inclined tube filler welding processes. The honeycomb filler comes in two types: inclined tubes and straight tubes, with materials of PP and PVC. The inclined tubes are mainly used for sand removal at the inlet in water supply and drainage projects, industrial and domestic water sedimentation, sewage sedimentation, oil separation, and tailings concentration treatment. They can also be used for the renovation of old tanks. The main characteristics are a large wet perimeter, small hydraulic radius, good laminar flow state, and particle sedimentation unaffected by flocculation interference. The straight tubes are used in tower-type biological filters, high-load biological filters, submerged biological filters (also known as contact oxidation tanks), and microbial carriers for biological rotating discs. They mainly treat industrial organic wastewater and urban sewage, with treatment efficiency higher than that of activated sludge tanks, occupying a smaller area; aeration intensity is lower than that of activated sludge tanks, and there is no need for sludge return; the sludge volume is small, and adaptability is strong, greatly reducing the workload for sludge dewatering treatment. Currently, filtration processes often encounter surface compaction or clogging of the sand layer, causing the actual backwashing strength and time to far exceed design parameters. This is also due to the residual microorganisms, biodegradable organic substances, and dissolved oxygen in the effluent of the oxidation tank undergoing comprehensive biochemical reactions. Since most design processes use post-filtration disinfection, the aforementioned biochemical reactions continue during sedimentation filtration. To ensure the normal operation of the clarification process, it is recommended to adopt pre-filtration disinfection processes. The wastewater treatment technology for Qingdao Beer wastewater has been using pre-filtration disinfection for 15 years without any clogging issues in the filtration devices. When filtration is used, it is recommended to increase the carbon layer with trace aeration to form a biochar process, with aeration intensity at about 5% of the water volume, which can extend the regeneration cycle. Dongying honeycomb inclined tube prices are reasonable, and hexagonal honeycomb inclined tubes are made from imported modified ethylene-propylene copolymer plastic, which is formed into hexagonal tubes through infrared constant temperature mechanical stretching and then welded into a complete product using patented technology and high-frequency welding for installation at the customer's site.
The honeycomb inclined tube is mainly used for sand removal at the inlet in water supply and drainage projects, industrial and domestic water sedimentation, sewage sedimentation, oil separation, and tailings concentration treatment. It can also be used for the renovation of old tanks. The main characteristics include a large wet perimeter, small hydraulic radius, good laminar flow state, and particle sedimentation not affected by flocculation interference. In addition to its use in water purification and treatment of wastewater from chemical plants, domestic sewage treatment plants, coal mine water treatment, coal washing plant water treatment, power plant concentration tanks, tailings water treatment, pharmaceutical factories, and paper mill wastewater treatment for sand removal, rapid sedimentation, oil separation, and tailings concentration, it is particularly effective in renovation benefits for water treatment plants and wastewater treatment projects.
