Nanning Polycarboxylic Acid Storage Tank Wholesale, Liuzhou Storage Tank Direct Sales, Guilin Plastic Water Tank

1. **PE storage tanks refer to a series of seamless plastic (polyethylene) storage and transportation equipment, which is one of the three major series of storage tanks. This series of products uses a unique formula modification to enhance polyethylene (PE), which has advantages such as seamless, leak-proof, non-toxic, lightweight, aging resistance, impact resistance, corrosion resistance, long service life, and compliance with hygiene standards. The production process of PE storage tanks is rotational molding, also known as rotomolding or rotational casting. It is a method of forming hollow products from thermoplastic materials. First, powdered or paste-like PE materials are injected into a mold. By heating the mold and rotating it in both horizontal and vertical directions, the materials are evenly distributed throughout the mold cavity and melted under the action of gravity and centrifugal force. After cooling, the mold is released to obtain hollow products. Due to the low rotation speed in rotomolding, the products have almost no internal stress, making them less prone to deformation or dents. The surface of the product is flat and smooth.** 2. **The characteristics of rotomolded containers are as follows:** - **Characteristic One: Acid and alkali resistance.** - **Characteristic Two: The temperature resistance does not exceed 70 degrees Celsius, and the freezing resistance should not be lower than minus 30 degrees Celsius.** - **Characteristic Three: The products are designed for normal pressure and should not be subjected to positive or negative pressure exceeding normal atmospheric pressure (1 atmosphere). If stirring is required or the acid and alkali concentration density exceeds 1.2, it is advisable to add a reinforcing sleeve and increase the wall thickness of the barrel. This characteristic is especially crucial for barrels with a capacity exceeding 10,000L. (For nitric acid concentrations exceeding 28%, only premium products should be used with reinforcing sleeves.)** - **Characteristic Four: This container is a product of one-piece rotomolding, featuring advantages such as no welding, no seams, non-toxic, odorless, easy to clean, and flexible handling.** 3. **Our company produces and supplies food-grade water storage tanks, purified water storage tanks, distilled water storage tanks, secondary water supply tanks for high-rise buildings, pickling barrels for pickled vegetables, sauerkraut barrels, chili pickling barrels, concrete additive storage tanks, acid and alkali-resistant storage tanks/corrosion-resistant storage tanks/vertical storage tanks/conical bottom tanks. We offer a wide range of seamless all-plastic PE storage tank products from 1 ton to 50 tons in stock, manufactured using rotational molding equipment and technology to achieve seamless one-piece molding. The products boast advantages such as impact resistance, aging resistance, lightweight, leak-proof, acid and alkali resistance, long service life, and compliance with hygiene standards. Their performance exceeds that of traditional ordinary fiberglass containers and plastic welded containers, and they can replace stainless steel, titanium, and other metal containers within a considerable range. They are ideal corrosion-resistant storage and transportation equipment for chemical liquids. Special PE materials are used, molded in one piece without seams, strong and durable, resistant to various acids and alkalis, corrosion-resistant, and long-lasting. They are ideal replacements for stainless steel, aluminum, organic glass, and plastic welded boards. Our company customizes various specifications and models of rotomolded products, ensuring quality and timely delivery. We welcome customers to inquire.** 4. **Installation precautions:** - **(1) The interfaces or flanges installed on this container before leaving the factory may loosen or even be damaged during transportation. It is essential to check for integrity before receiving and installing.** - **(2) When connecting containers or external pipelines, flexible or U-shaped connections must be used and supported by brackets. The pipelines and interfaces should not bear any load to prevent damage to the connections and the container body from the pressure of the liquid inside the container and the weight of the pipelines.** - **(3) After the interfaces and pipelines are installed, a water test must be conducted to check for leaks at the barrel body, interfaces, and pipeline connections.** - **(4) The interfaces and pipeline sections should be inspected monthly, and any abnormalities should be repaired promptly.** 5. **Main products: Nanning Tianyi primarily offers: PE storage tanks, plastic storage tanks, chemical storage tanks, corrosion-resistant storage tanks, plastic water towers, conical bottom barrels, plastic round barrels, plastic square boxes, dosing boxes, floating boxes, crash barrels, acid washing tank processing, steel-lined plastic products, plastic containers, plastic irregular component welding, transportation tank welding, fiberglass waste gas treatment equipment, and large fiberglass containers. We also undertake processing of various irregular components.**