Plastic Auxiliary Machinery-Feeding/Mixing Equipment-Metering System
Brief Description:The multifunctional side-feeding system is designed for adding color masterbatches and other additives. Some of these systems have metering functions, which require more complex control systems. In contrast, a simple injection addition function is relatively straightforward, involving a small screw (a welded part will suffice) driven by a gear motor, with the outer wall made of seamless steel pipe, and speed controlled by a variable frequency drive.
Introduction to the Multi-functional Side Feeding System for Compounding:It is designed for adding color masterbatches and other additives. Some have metering functions. The control system that requires metering functions is more complex. The simple addition and injection function is relatively simpler, achieved by driving a small screw (a welded part will suffice) with a geared motor, using seamless steel pipe for the outer wall, and adjusting the speed through a variable frequency drive.
Maintenance Key Points:
1. For material dosing and metered feeding, to ensure uniform and stable feeding and prevent material from flowing freely, it should be installed horizontally. For the continuous feeding of general materials, it can be installed at a 10° downward inclination. For sticky materials and those with higher moisture content, it can be installed at a 15° downward inclination.
2, After installation, a clearance of 20mm should be left for free movement, and it should be level horizontally. The suspension device should use a flexible connection.
3. Before the no-load test, all bolts should be tightened once, especially the foundation bolts of the vibrating electromagnet. After continuous operation for 3-5 hours, they should be retightened. During the test run, both vibrating motors must rotate in the same direction.
4. During the feeding process, the amplitude, current, and noise stability should be checked frequently; if any abnormalities are detected, the machine should be stopped immediately for handling.
5. Lubricating oil should be added to the electromagnetic bearings every 2 months, and once a month during high-temperature seasons.
Multifunctional Side Feeding SystemCommon Faults:
Check the equipment control panel for any issues, such as the parameters of the feeder, and whether the suction and discharge times are correct. If there is a problem here, it might not be able to suction materials properly, and changes should be made promptly to resolve the issue.
2. Check the pneumatic pump to see if its compressed air source pressure meets the relevant regulations. In most cases, the air source pressure for a pneumatic pump is 6-7 MPa. If the pressure does not meet the requirements, it should be checked whether the air source needs to have its ventilation piping replaced.
3. The inability to properly draw in material may also be due to disassembly activities of the machine, where air leakage occurs at the clamp between the top cover and the barrel, thus preventing normal material drawing operations.
4. Open the top cover, remove the filter plate, and observe whether there is too much dust or any clumping on the filter element. These issues can lead to improper suction. To resolve this, simply clean it with compressed air.
Nanjing Xintuo Intelligent Equipment Co., Ltd. was established on May 29, 2020, with Zhou Xianting as the legal representative. The registered capital is 10 million RMB, and the unified social credit code is 91320113MA21LF2H92. The company is located in the Baima Town Industrial Concentration Zone, Lishui District, Nanjing City. It belongs to the other manufacturing industry. Its business scope includes: Permitted projects: import and export of goods; import and export of technology (projects that require approval by relevant departments can only be carried out after obtaining such approval, specific business items are subject to the approval results). General projects: sales of intelligent material handling equipment; research and development of machinery and equipment; general equipment manufacturing (excluding special equipment manufacturing); specialized equipment manufacturing (excluding licensed specialized equipment manufacturing); sales of metal products; wholesale of electronic components; sales of instruments and meters; sales of artificial intelligence hardware; processing and sales of mechanical parts and components; general component manufacturing; sales of plastic products; production and sales of Class I medical devices; sales of Class II medical devices; sales of health supplies and disposable medical supplies; sales of special labor protective equipment; technical services, technical development, technical consultation, technical exchange, technology transfer, and technology promotion (except for projects that require approval, activities can be conducted independently according to the business license). The current operating status of Nanjing Xintuo Intelligent Equipment Co., Ltd. is active (in operation, open, registered).
