Luoyang Drainage Board ManufacturerManager Shao:156-2152-1000TaianDa Xing Geosynthetic Materials Co., Ltd.is a company primarily engaged in the sales of drainage boards, mainly involved in the sales and service of materials for rooftop greening and underground garage roof greening. Products include HDPE plastic drainage boards, HIPS water-retaining drainage boards, drainage boards, geotextiles, geonets, HDPE root barrier layers, waterproof boards, grass planting grids, drainage pipes, etc..The main products of our company are: drainage boards, water-retaining drainage boards, filter boards, root barrier boards, grass planting grids, plastic drainage boards, protruding drainage boards, drainage board prices, drainage board quotations, drainage board performance.KKolps33378
We welcome your inquiries! This is a good intention and a dream, with only the dream of Zhuangzi testing spring tea left, with a diamond ring and a heart, 【156-2152-1000】; Loving green, planting green, and protecting green are the fundamental projects to enhance the core competitiveness of cities and also projects that benefit the people. We must be pragmatic and determined, and we must take the momentum of breaking ground to plant and protect green.
Luoyang Drainage Board ManufacturerBase Surface Cleaning:156-2152-1000 Manager Shao
The base surface must be cleaned according to design requirements, which is key to ensuring seepage prevention effects. It is particularly important to thoroughly remove debris such as sharp stones and tree roots. The base surface should not have local unevenness, and the cleaned base surface should be compacted with a rammer or tamping plate to make it dense and flat.
Composite Laying:KKolps33378
When laying the membrane, it must be laid from the bottom upwards. The membranes should be pressed flat and closely adhered both to each other and to the base surface, but should not be pulled too tight; generally, it should be slightly loose, but no air bubbles should be left underneath the membrane. Because geosynthetic membranes are relatively thin and light, they can easily be blown by the wind before the protective layer is laid. Therefore, the area of membrane laid at one time should not be too large, and protective soil should be covered as the membrane is being laid.156-2152-1000 Manager Shao
According to the manufacturer's provided data, the width of the composite geosynthetic membrane is 1.0~1.9m. This project selects a width of 1.9m to reduce the amount of joint material. Joints can be made using thermal bonding, adhesive bonding, overlapping, etc. This project uses adhesive bonding, with a joint width of 50mm.
If any punctures or tears are found in the geosynthetic membrane, they must be patched with a geosynthetic membrane adhesive that is three times the area of the damage.
Protective Cover:Luoyang Drainage Board Manufacturer156-2152-1000 Manager Shao
The protective layer soil material 10cm thick against the geosynthetic membrane must be screened, and particles larger than 6mm are not allowed; otherwise, they may puncture the geosynthetic membrane. The protective layer soil material must be compacted, ensuring a dry density of above 1.5, with samples taken for inspection at any time. When backfilling the protective layer and constructing the block stone cover, care must be taken to avoid breaking the geosynthetic membrane. Under the block stone cover, a 100mm thick layer of crushed stone or gravel should be laid to prevent the erosion of the protective layer due to changes in water level, wind and wave factors. Dry block stone should be laid by manual lining, with stones tightly embedded, and the individual weight of the surface stones should be greater than 48kg, with all gaps filled with small stones.
Luoyang Drainage Board ManufacturerConstruction Method:156-2152-1000 Manager Shao
During transportation, the geosynthetic membrane should not be dragged or pulled hard to avoid punctures from sharp objects.
1. It should extend from the bottom to the top, without pulling too tight, leaving a surplus of 1.50% for local subsidence stretching. Considering the actual situation of this project, the slope will be laid from top to bottom;
2. The longitudinal joints of two adjacent sheets should not be on the same horizontal line and should be staggered by more than 1m;
3. Longitudinal joints should be more than 1.50m away from the dam toe and bend toe, and should be set on the plane;
4. Lay the slope first, then the field bottom; KKolps33378
5. When laying the slope, the direction of the membrane should be roughly parallel to the steep slope line.
Application Range:Luoyang Drainage Board Manufacturer156-2152-1000 Manager Shao
Landfill sites, sewage treatment plants, power plant tailings treatment, chemical plants, fertilizer plants, sugar factories for sewage tailings treatment, non-ferrous metallurgy, ponds, tailings treatment, subways, basements, tunnels, roof lining, and other special environments for seepage prevention (special use); horizontal seepage prevention laying for reservoirs, canals, and embankments; vertical seepage prevention laying; seawater, freshwater, and aquaculture seepage prevention.
Drainage boards, water-retaining boards, grass planting gridsand other series of geosynthetic materialsplease contact Manager Shao 156-2152-1000
Taian Da Xing Geosynthetic Materials Co., Ltd. focuses on drainage boards as the leading product, offering cute prices and high-quality enjoyment.
Welcome to call for inquiries 15621521000
Contact Person: Manager Shao Phone: 156-2152-1000 Address: Taian Agricultural University Science and Technology Industrial Park
