Product Content
Category
Other Products-Other Products
1. PE Rotational Molding Products: Large Water Tanks, Plastic Buckets, Plastic Containers, Acid-Base Storage Tanks
Manufacturing Process: Made from imported polyethylene raw materials using mature overseas rotational molding technology for complete one-time forming.
Product Advantages: Smooth inner and outer surfaces from one-time molding, good hygiene and UV resistance, impact-resistant, strong earthquake resistance, not prone to aging, does not grow algae, easy to clean, rodent and termite resistant, easy to install and move. Widely used in high-rise buildings for secondary water supply, water storage, water treatment and purification equipment, electronics industry, industrial cooling water, chemical formulations, chemical raw materials, storage and transportation of various oils and beverages.
Common Product Names: PE Water Tank, PE Bucket, Water Storage Tank, Water Reservoir, PE Storage Tank, Plastic Storage Tank, Cleaning Water Tank, Plastic Water Tower Storage Tank, Polyethylene Water Tank, Reverse Osmosis Plastic Water Tank, Ultrafiltration Water Tank, Raw Water Tank, Pure Water Tank, Reclaimed Water Tank, Roof Water Tank, Plastic Bucket.
2. Plastic PE Storage Tank, also known as PE Chemical Storage Tank, PE Tank, Plastic Bucket, PE Bucket, Acid-Base Tank, Plastic Container, PE Water Tank, Water Tower, Water Storage Bucket, Measuring Bucket, Chemical Mixing Tank, PE Chemical Drum Container, Acid-Base Storage Tank, Corrosion-Resistant Tank, Chemical Storage Tank, etc. The plastic PE chemical storage tank refers to a series of seamless plastic (polyethylene) storage and transportation equipment, which is one of the three major series of storage tanks. This series of products uses a unique modified formulation to enhance polyethylene (PE) as the raw material, utilizing a special process for overall one-time forming (rotational molding process), thus the storage tank also possesses advantages such as no welded seams, no leakage, non-toxic, lightweight, aging resistant, impact resistant, corrosion resistant, long lifespan, and compliance with hygiene standards. The production process of plastic PE chemical storage tanks is rotational molding, also known as rotational forming or rotational casting. It is a method for hollow forming of thermoplastic plastics. First, powdered or paste-like PE material is injected into the mold, and by heating the mold and rolling it in both horizontal and vertical directions, the materials evenly fill the mold cavity and melt under the influence of gravity and centrifugal force. After cooling, the mold is removed to obtain hollow products. Due to the low rotation speed of rotational molding, the products have almost no internal stress, making them less prone to deformation and dents. The product surface is flat and smooth.
3. Plastic Water Tanks, PE Water Tanks, and Water Tower Storage Tanks should meet the following conditions: sufficient wall thickness, uniform wall thickness, high-quality raw materials, skilled manufacturing techniques, and strict factory requirements. Our products strictly adhere to the quality standards of the People's Republic of China GB9687-88, with drinking-grade plastic products passing inspection. The various containers produced have excellent quality, a wide variety, complete categories, acid and alkali resistance, high-temperature resistance (80℃), and freeze resistance (--40℃). They are widely used in construction water supply, water treatment, environmental protection, medicine, food, electronics, chemicals, brewing, sugar production, vegetable pickling, aquaculture, freezing and refrigeration, textile printing and dyeing, and many other industries. Their performance significantly surpasses that of traditional fiberglass containers, plastic welded containers, steel-lined fiberglass containers, and steel-lined rubber containers, making them ideal storage and transportation equipment for most chemical and other liquids. They can replace stainless steel, nickel, titanium, and other material products within a considerable range, and the products are widely applicable in chemicals, pharmaceuticals, biotechnology, dyes, metallurgy, rare earths, electroplating, electricity, textiles, printing, environmental protection, machinery, brewing, food, and other industries.
4. This type of plastic storage tank is produced without using any additives or plastic fillers, entirely made from our company's unique modified formulation to enhance polyethylene (PE) material. From the tank body to the inlet and outlet, manhole, and flange, all are integrally formed without welded seams. Thus, the storage tank also possesses advantages such as no welded seams, no leakage, non-toxic, lightweight, aging resistant, impact resistant, corrosion resistant, long lifespan, and compliance with hygiene standards. Its price is lower than that of stainless steel storage tanks, ordinary fiberglass storage tanks, polypropylene tanks, and polyvinyl chloride tanks, and it has a longer lifespan under natural conditions.
