Henan Deyuan Rubber and Plastic Products Co., Ltd. provides DN710 HDPE Water Supply Pipe PE Drinking Water Pipe, with product specifications ranging from DN32mm to DN1200mm. The PE water supply pipe is made of high-density polyethylene and corresponding fittings, and all products comply with the GB/T13663-2000 standard. Application range of DN710 HDPE Water Supply Pipe PE Drinking Water Pipe: 1. Municipal engineering water supply systems, indoor water supply systems for buildings, outdoor buried water supply systems, as well as buried water supply systems for residential communities and factories, old pipeline repairs, water treatment punishment engineering pipeline systems, and industrial water pipes for landscaping, irrigation, and other fields; 2. Indoor water supply systems for buildings; 3. Good environmental adaptability and frost resistance. Can be used for both indoor and outdoor water supply pipelines; 4. Long service life, with a lifespan exceeding 50 years; 5. Industrial water pipes for landscaping, irrigation, and other fields; 6. Vertical and horizontal drainage behind mid-soil walls and ditches on highways. Installation and construction precautions for DN710 HDPE Water Supply Pipe PE Drinking Water Pipe: 1) Control of the lifting and transportation of plastic pipes. When using manual lowering of the pipes, personnel on the ground can pass the pipes to the trench workers. For sloping excavated trenches, non-metallic ropes can be used to secure both ends of the pipe body to keep it balanced and evenly slide into the trench. It is strictly prohibited to roll the pipes into the trench from above; when using a crane to lower pipes, non-metallic ropes should be used to secure the pipe body, and through-the-hole lifting is not allowed to avoid damaging the pipes. 2) Strictly control the straightness and slope of the pipeline. The pipeline should be straight, and the bottom of the pipe should not have any reverse slope. If the pipeline needs to be laid in a zigzag pattern due to special circumstances, the allowable turning angle between adjacent pipe joints should not exceed 2°. 3) Quality control of the joints. The joints of plastic pipes generally use elastic sealing rubber rings for socket connections. Supervisors should check the rubber rings for proper match and integrity before the joints, confirming the placement position of the rubber rings and the insertion depth into the socket. During connection, the inner wall of the socket should be cleaned, and lubricant should be applied to both the inner wall of the socket and the rubber ring on the joint, requiring the construction unit to follow the prescribed methods for joining. 4) Rainy season construction control. During construction in the rainy season, the construction unit must take measures to prevent the pipes from floating. If displacement, floating, or detachment occurs, rework is required. Installation construction of DN710 HDPE Water Supply Pipe PE Drinking Water Pipe: PE pipes can be constructed in winter and in cold regions, as long as the welding environment is stable and the operating parameters are suitable, the required strength can be achieved. The main connection method for PE pipes is fusion connection, including electric fusion and hot fusion, as the materials are the same, joint strength is higher than the strength of the body. PE pipes have good flexibility, making them easier to work with in areas with complex terrain. Materials of DN710 HDPE Water Supply Pipe PE Drinking Water Pipe: PE water supply pipes are made from imported PE100 raw materials, manufactured according to the GB/T13663 standard. The products have good weldability, resistance to environmental stress cracking, and rapid crack resistance, meeting the requirements of international and national standards. This thoroughly solves the long-standing problem of secondary pollution in China's water supply networks and water transportation processes, achieving the goal of 'direct drinking water' and can be widely applied in urban tap water pipes, residential and commercial building water supply systems. Henan Deyuan Rubber and Plastic Products Co., Ltd. provides water supply pipes with product specifications ranging from DN32mm to DN1200mm, and PE water supply pipes are made of high-density polyethylene and corresponding fittings, all complying with the GB/T13663-2000 standard. Advantages of DN710 HDPE Water Supply Pipe PE Drinking Water Pipe: 1. Good sanitary performance: non-toxic material, no scaling layer, does not breed bacteria, effectively solving the issue of secondary pollution in urban drinking water. 2. Excellent corrosion resistance: resistant to the erosion of various chemical media. 3. Long service life: can be safely used for over 50 years. 4. Good impact resistance: good toughness, high impact strength, not easy to cause pipe rupture. 5. Reliable connectivity: joints will not disconnect due to soil movement or live loads. Applications of DN710 HDPE Water Supply Pipe PE Drinking Water Pipe: Outdoor water supply pipes, building water supply pipes, building drainage pipes, buried drainage pipes, gas pipes, electrical conduits, agricultural irrigation, industrial pipes, hot water heating PE pipes, sewage PE pipes, etc. Henan Deyuan Rubber and Plastic Products Co., Ltd. is a high-tech enterprise integrating R&D, production, and sales, specializing in the production of ultra-high molecular weight polyethylene pipes, tunnel escape pipes, steel belt reinforced polyethylene (HDPE) spiral corrugated pipes, DN710 HDPE Water Supply Pipe PE Drinking Water Pipe, inner and outer coated composite steel pipes, 3PE anti-corrosion pipes, lined plastic pipes (steel-lined PO pipes, steel-lined PE pipes, steel-lined fluorine pipes), lined rubber pipes, and other series of multi-specification fittings and pipes. The products are mainly applied in industries such as chemical, electric power, mining, metallurgy, pharmaceuticals, water conservancy, municipal engineering, construction, environmental protection, dredging, and coal washing. Survival based on quality, development based on reputation, we warmly welcome your patronage, sincerely looking forward to serving you!