RX Hujia brand Eagle Beak Drip Line general specifications are 25*30*2000, material is PVC, which has derived a thermal insulation and crack prevention eagle beak drip line with mesh cloth: specifications are 100*100*2000. These two specifications have been commonly used in residential building projects for many years, reinforcing the wall corners to prevent dents and other damages while also blocking water drips, making it a hero in building decoration!!
One: The method of RX Hujia brand Eagle Beak Drip Line:
1. During construction, in some areas such as parapets, ventilation cover plates, or protruding wall waistlines, the upper edges of these areas are generally made to be water-resistant, with a slope not less than 1:6. The lower edge usually uses a drip line, commonly known as an eagle beak. The construction of the drip line is completed simultaneously with wall plastering, protruding at least 10 millimeters from the wall surface. It is required to be consistently straight and circular around the edges.
2. Base layer method: The drip line is generally done under the window lintel. If the concrete surface is very smooth, it should be roughened first. One method is to chisel, and another method is to throw hair. Throwing hair involves mixing a 1:1 dilute porridge-like cement mortar with a suitable amount of construction adhesive, solidifying it on the concrete surface until it cannot be moved by hand.
3. Plumb suspension, leveling: Corner areas should be plumb, and the bottom edge should be on the same horizontal line. These areas should control in advance by snapping a line or pulling a taut line.
