Runxi brand Eagle mouth drip line general specifications are 25*30*2000, material is PVC, which has derived a kind of insulation and crack prevention eagle mouth drip line with grid cloth: specifications are 100*100*2000. These two specifications have been commonly used in residential building projects for many years,
while reinforcing the wall corners to avoid dents and other damages, and also block water drips, it is a hero in building decoration!!
One: The method of Runxi brand Eagle mouth drip line:
1. In construction, some parts, such as parapet small edges, ventilation cover plates or protruding wall waist lines, these parts usually have water seepage, with a slope not less than 1:6,
the lower edge is usually a drip line, commonly known as an eagle mouth. The construction of the drip line is completed simultaneously with wall plastering, protruding from the wall surface at least 10 millimeters. It is required to be consistent and circle around.
2. Base layer method: generally, the drip line is done under the window lintel. If the concrete surface is very smooth, it should be roughened first, one method is to chisel, another method is to throw hair.
Throwing hair is to mix an appropriate amount of building adhesive into a 1:1 dilute porridge-like cement mortar, solidify it on the concrete surface, and stop when it cannot be moved by hand.
3. Hang vertically, find horizontally: the corner parts should hang vertically, the bottom edges should be on the same horizontal line, these parts should control in advance by snapping or pulling lines.
