Runxi BrandEagle Beak Drip LineThe general specifications are 25*30*2000, made of PVC, and a reinforced version with mesh cloth for thermal insulation and crack prevention has been derived: specifications are 100*100*2000. These two specifications have been commonly used in residential building projects for many years.
At the same time, it reinforces the wall corners, preventing dents and other damage while blocking dripping water, making it a hero in building decoration!!
1: Runxi Brand Eagle Beak Drip Line Construction Method:
1. During construction, in certain areas, such as the small edge of the parapet wall, the vent cover, or the waistline that protrudes from the wall, the upper edge is generally made with a drip edge, with a slope of no less than 1:6.
The lower edge usually adopts the drip line, commonly known as the eagle beak. The construction of the drip line is completed simultaneously with the wall plastering, protruding at least 10 millimeters from the wall surface. It is required to be straight and consistent, with loops around the edges.
2. Base Layer Construction: The drip line is generally made under the window lintel. If the concrete surface is very smooth, it should be roughened first. One method is to chisel, and another is to use a spraying method.
The spraying method involves using a 1:1 slurry of cement mortar mixed with an appropriate amount of construction adhesive, allowing it to set on the concrete surface until it cannot be moved by hand.
3. Plumb and Level: The corners should be plumb, and the bottom edges should be on the same level. These areas should be controlled in advance by snapping lines or pulling control lines.
